logo-emblem-smallx187logo-emblem-smallx187logo-emblem-smallx187logo-emblem-smallx187
  • HOME
  • ABOUT US
  • SHOP
  • BOOK ONLINE
  • CONTACT
0

$0.00

✕

Oil change kit 1.8L L4 2.0 L4 (Audi/Porsche/Volkswagen)

May 25, 2023

Helvetica die-cut sticker

May 29, 2023
Show all
Oil change kit 3.0L (BMW)

Oil change kit 3.0L (BMW)

From $0.00

BMW 3.0L inline-six engines are not forgiving about oil spec — and they shouldn’t need to be. This kit is built for N51, N52, N54, and N55 applications. Liqui Moly in the correct BMW Longlife grade, OE-quality filter, and drain plug seal. Assembled in Québec. Ships Canada-only.

Liqui moly 5L
-+
Liqui moly 1L
-+
Engine Oil Filter
-+
Extra oil for top-off between oil changes
-+
Add Liqui Moly Ceratec
-+
SKU: HELKIT-BMW-3.0L Category: Engine oil change kits
Share
0
  • Description
  • Additional information
  • Fitment
  • Reviews 0

Oil Change Kit — 3.0L Inline-Six (BMW N51 / N52 / N54 / N55)

BMW’s 3.0L inline-six family covers a huge range of vehicles — 1 Series, 3 Series, 5 Series, X1 through X6, Z4, and more — but they all share the same core oil requirement: BMW Longlife-01 or Longlife-01 FE. The distinction between the two matters if your vehicle was built after approximately 2012, and it matters even more if fuel economy is part of your concern. This kit is configured for both.

What trips people up on these engines is the BMW extended-interval system. BMW tells owners they can go 24,000 km or more between changes under the Condition Based Service (CBS) system. Many technicians — and most BMW owners who actually care about engine longevity — don’t wait that long. 12,000–15,000 km with quality oil is a more conservative and more protective interval, especially for the N54 and N55 turbocharged variants that run significant thermal and combustion load.

What’s in the kit

  • Liqui Moly oil — BMW Longlife-01 / Longlife-01 FE approved (select the grade for your vehicle)
  • OE-quality oil filter — cartridge kit (Mann HU816X or equivalent)
  • Drain plug gasket — M12 × 1.5

Oil capacity

6.5 Liters / 6.9 Quarts (with filter). After filling, run the engine briefly, shut off, wait 2 minutes, then check the dipstick. BMW inline-sixes often read slightly below the maximum mark immediately after a fill — this is normal. Top off to the upper mark before driving.

Oil grade selection

  • 0W-30 — for vehicles requiring Longlife-01 FE (fuel economy variant, some post-2012 models)
  • 5W-40 — for vehicles requiring Longlife-01 (most N51/N52/N54/N55 applications, pre-2012 common)

Check your oil filler cap or owner’s manual for the exact spec. When in doubt, email us your VIN.

Before you order

The N54 and N55 have a turbocharger oil feed line that should be inspected for carbon deposits during an oil change. If you’re servicing a high-mileage N54, consider adding Liqui Moly Pro-Line Engine Flush to your order. Not sure about fitment? Email [email protected] with your year, model, and engine code.

Shipping

Canada only. Ships from Québec.

About the filter

OE / OEM-quality. Same specification as the factory part. Brand names referenced are for fitment identification only.

Brand

Elring. Hengst. Liqui-Moly. Mahle. Mann Filter. MTC

Drain plug size

M12 x 16mm

Oil specification

BMW Longlife-01. BMW Longlife-01 (bis MJ 2018). BMW Longlife-01 FE. BMW Longlife-01 FE (bis MJ 2018)

Oil viscosity

0W30. 5W40

Make Model Year Engine Oil Capacity
Make Model Year Engine Oil Capacity

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

logo-emblem-smallx187-trans
  • HOME
  • ABOUT US
  • SHOP
  • BOOK ONLINE
  • CONTACT

Helvetica Auto Solution

Canada —
1871 Rte du Carrefour
Val-des-Monts, QC
J8N 7M8

+1 (819) 671-8186
[email protected]

REFUNDS & RETURN POLICY

© 2000-2026 Helvetica Auto Solution | All Rights Reserved.

0

$0.00

    ✕

    Login


    Lost your password?

    Create an account?

    ✕

    Cart

    Proceed to checkout View cart